Controller Tuning tool

Purpose of Controller Tuning is to:

  • set the controller parameters for operational state of the process
  • for some APC’s, manual setting is not feasible:
    o   difficult to determine parameters – process model must be known
  • reduce amount of work and time necessary for designing – setting up the control application
  • reduce the depth of knowledge necessary in using the APC:
    o   target objective: plug & play functionality

 

IDR BLOK’s Controller Tuning Tool:

  • automatically calculates the parameters and recommends the most suitable controller structure
    o   calculation is  based on a specified process model
  • various tuning methods for PID and Smith controllers:
    o   Area method
    o   Ziegler-Nichols
    o   CHR
    o   Balanced method
  • Basic and Advanced tuning method for PFC controllers
  • every method can tune the controller in the reference-tracking mode or the disturbance elimination mode
  • the tuning results:
    o   Kp, Ti, Td and Kd for PID,
    o   Kp, Ki, Kd, Tf_MV and Tf_SP for SMITH and modular PID,
    o   Trbf and H for PFC.

 

Tuning example on real process with PID/M controller

The PID/M controller controls water height in 2nd tank in two tanks system.

Controller tuning tool

 

Please contact us for more information.

idr@inea.si

 

SODELUJMO!

Univerzalne rešitve na področju računalniškega vodenja v energetiki in industriji, ki bi ustrezala vsem podjetjem, ni! Ker je naročnik naš partner in ker sodelujemo s podjetji iz različnih panog, razumemo vaše potrebe in znamo izdelati vam prilagojeno rešitev.

Kontaktirajte nas